欢迎访问:无锡大桥轴承机械有限公司!
一键分享网站到:
服务热线
0510-85410121
网站首页 关于我们 产品展示 公司动态 服务范围 订货指南 专利荣誉 售后服务 公司一角 在线留言 联系我们
咨询热线 0510-85410121

辗环机型号代码含义

发布时间:2018-07-07点击量:219

Q代表气动

Y代表液压驱动

D普通中窄宽度机型

E大宽度工作机型

F特大宽度工作机型

 

D51型辗环机性能特点

A:整机造型新颖,机身底座为钢板焊接结构,轻巧美观,刚性好。

B:机床设计科学合理,特别是主轴轴承结构分布的创新与改进,使机床的辗压精度高。

C:上支承滑块断面呈矩形,刚性好。滑块导向导轨长度增大到滑块行程的5-6倍,导向精度高。

D:机床主要零部件均采用铸钢或优质合金钢制造,材质优良。

E:下支承轴承密封,能在较为恶劣的环境下正常工作。

F:用国际标准的Yx密封圈密封,气缸阻力小,密封性能可靠,耐磨性好。

G: 辗压轮采用内锥形涨圈固定,定位精度高,辗压轮拆卸更换方便。

H:精研机采用同步传动,平稳轻便,可调范围大。

I:气路排气系统装有消声器,降低噪音,保护工作环境。

"Q"means pneumatic driving

"Y"means hydraulic driving

"D"means normal machine made with intermediate narrow width

"E"means machine mode with large width

"F"means machine mode with supper-large width

A:Original appearance of machine,the machine base is weld-formed by steel plate,such structure is light and slinky and has a good rigidity.

B:Reasonable and scientific design for machine tool,the machine tool has a high rolling accuracy for the new design and development of distribution of main shaft bearing.

C:Rectangle section of upper sliding block and rigidity.The length of guide rail of sliding block is increased to 5-6 times of journey of sliding block and guide accuracy is high.

D:Main parts of machine are all made of cast steel or high-quality alloy steel.

E:Sealed lower supporting bearing to make it working normally is a poor condition.

F:Sealed with YX O-ring in accordance with intenational standard,low resistance of cylinder, reliable seal performance and good abrasive resistance.

G:The rolling wheel is fixed with an internal cone-shaped expansion ring and its locating accuracy is high,the rolling wheel can be disassembled and replaced easily.

G: H:The fine-grinding machine is driven in a synchronized mode and rus smoothly, a wide adjusting range is available.

I:A muffler is equipped for exhausting system of gas pipeline to reduce noise and protect environment.

网站首页 关于我们 产品展示 公司动态 服务范围 订货指南 专利荣誉 售后服务 公司一角 在线留言 联系我们
CONTACT US联系我们
ADDRESS江苏省无锡市太湖街道金城湾路98号
LANDLINE0510-85410121
QR code关注我们
无锡大桥轴承机械有限公司拿出手机扫一扫